Techno-Economic Assessment of Dimethyl Ether (DME)Production through Methanol Dehydration Process
DOI:
https://doi.org/10.55893/jt.vol24no2.797Keywords:
Dimethyl Ether, Methanol, Techno-Economic AnalysisAbstract
Dimethyl Ether (DME) is a clean, colorless gas that serves as a potential alternative to liquefied petroleum gas (LPG). This study presents a comprehensive techno-economic assessment of DME production via methanol dehydration with a plant capacity of 20,000 tons per year. The process utilizes an alumina–silicate catalyst in a multitube fixed-bed reactor operating at 300–350°C and 30 bar. Simulation results show a methanol conversion of 85% per pass, achieving a final DME purity exceeding 99.5%. The total capital investment (CAPEX) is estimated at USD 12.8 million, with annual operating costs (OPEX) of approximately USD 13 million. Economic indicators reveal a Net Present Value (NPV) of USD 5.2 million, an Internal Rate of Return (IRR) of 14.5%, a Return on Investment (ROI) between 15–17%, and a payback period of six years. The break-even point (BEP) is reached at 60–65% of design capacity. The findings indicate that the DME production process is technically feasible and economically attractive for industrial implementation, supporting Indonesia’s clean energy transition and reduction of LPG imports.
References
Aries, R., & Newton, R. (1955). Chemical Engineering Cost Estimation. McGraw-Hill.
Branan, C. R. (2005). Rules of Thumb for Chemical Engineers (4th ed.). Elsevier.
Coulson, J. M., Richardson, J. F., Backhurst, J. R., & Harker, J. H. (1983). Chemical Engineering: Volume 6 – Design. Pergamon.
Dieterich, V., Neumann, K., Niederdränk, A., Spliethoff, H., & Fendt, S. (2024). Techno-economic assessment of renewable dimethyl ether production pathways. Energy, 301, 131688.
Fogler, H. S. (2004). Elements of Chemical Reaction Engineering (4th ed.). Prentice Hall.
Kirk-Othmer. (1998). Encyclopedia of Chemical Technology (Vol. 8). Wiley.
Kofler, R., Campion, N., Hillestad, M., Meesenburg, W., & Clausen, L. R. (2024). Techno-economic analysis of dimethyl ether production from biomass and off-grid renewable electricity. Energy & Fuels, 38(10), 8777–8803.
Kompas.com. (2025). Pemerintah targetkan Net Zero Emission 2060.
Ministry of Energy and Mineral Resources. (2022). Statistik Energi Indonesia.
Muazzam, Y., Yousaf, M., Zaman, M., Elkamel, A., Mahmood, A., Rizwan, M., & Adnan, M. (2022). Thermo-economic analysis of integrated hydrogen–methanol–DME production. Resources, 11(10), 85.
Pamungkas, W. A., Setyawati, R. B., Rifai, A. F., Setiawan, C. P., Budiman, A. W., & Inayati, I. (2023). Techno-economic study on DME as an LPG substitute.
Perry, R. H., & Green, D. W. (2019). Perry’s Chemical Engineers’ Handbook (9th ed.). McGraw-Hill.
Peters, M. S., & Timmerhaus, K. D. (1991). Plant Design and Economics for Chemical Engineers (4th ed.). McGraw-Hill.
Ramadhan, M. F., & Muthia, R. (2025). Advanced distillation technologies for DME production. Korean Journal of Chemical Engineering, 42, 505–527.
Smith, J. M., & Van Ness, H. C. (1993). Introduction to Chemical Engineering Thermodynamics (5th ed.). McGraw-Hill.
Supriyadi, F., Putra, I. A., Abriyant, R. Y., Sismartono, D., Wibowo, C. S., & Priyono, B. (2025). Techno-economic analysis of DME in Indonesia’s household energy sector. Scientific Contributions Oil and Gas, 48(2), 259–277.
Turton, R., Bailie, R. C., Whiting, W. B., & Shaeiwitz, J. A. (2012). Analysis, Synthesis, and Design of Chemical Processes (4th ed.). Prentice Hall.
Yaws, C. L. (1999). Chemical Properties Handbook. McGraw-Hill.
Additional Files
Published
Issue
Section
License
Copyright (c) 2025 Yessa Julyana, Hendriyana, Een Taryana, Handoko Iskandar, Xbal Meiprastyo
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright and grant Jurnal Teknik: Media Pengembangan Ilmu dan Aplikasi Teknik the right of first publication. Articles are published open access under the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, sharing, adaptation, distribution, and reproduction in any medium or format, for any purpose, provided that appropriate credit is given to the original authors and source, a link to the license is provided, and any changes are indicated.
